PebblePower devices all have some common features. Please refer to PebblePower page for details.
<aside> 💡 PebblePower8 (PP8) and PebblePower12 (PP12) are designed to replace centralised switch panels / distribution boards and therefore their logical designs are slightly different than PP1, PP2, and PP4.
</aside>
<aside> 💡 Each channel is rated at 30A and so the architecture of the PCB and the way power is provided to the channels is different than PP1, PP2 and PP4.
</aside>
<aside> 💡 PP8 and PP12 require more GPIO pins than are available from the ESP32-C6. Therefore these flavours of PP devices will use GPIO expanders, connected via the internal i2c bus to provide the additional GPIO’s required.
</aside>
PebblePower8 specific features are:
Below are both the common requirements and specific requirements of the PebblePower1:
‣